Op voorraad
Module
Tooth idth b (mm)
ha (mm)
h0 (mm)
Nominal Length L (mm)
Nominal Length (mm)
Weight (kg)
Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05.
Op voorraad
Module
Tooth idth b (mm)
ha (mm)
h0 (mm)
Nominal Length L (mm)
Nominal Length (mm)
Weight (kg)
| Artikelnummer | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MAD/22468300
|
||||||||||||||
MAD/22868300
|
||||||||||||||
MAD/22868500
|
||||||||||||||
MAD/24168300
|
||||||||||||||
MAD/24168500
|
||||||||||||||
MAD/24368300
|
||||||||||||||
MAD/24368500
|
| Module | Tooth idth b (mm) | ha (mm) | h0 (mm) | Nominal Length L (mm) | Nominal Length (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| 1,0 | 15 | 15 | 14 | 500 | 500,0 +1 | 0,81 |
| 1,5 | 15 | 15 | 13,5 | 500 | 499,1 +/-0,3 | 0,78 |
| 1,5 | 15 | 15 | 13,5 | 1000 | 998,4 +/-0,3 | 1,56 |
| 2,0 | 20 | 20 | 18 | 500 | 502,1 +/-0,3 | 1,40 |
| 2,0 | 20 | 20 | 18 | 1000 | 998,5 +/-0,3 | 2,53 |
| 3,0 | 25 | 25 | 22 | 500 | 498,9 +/-0,3 | 2,12 |
| 3,0 | 25 | 25 | 22 | 1000 | 998,4 +/-0,3 | 4,22 |
| Adviesprijs | Prijs | |||
|---|---|---|---|---|
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
Turfschipper 27
2292 JC Wateringen
Nederland
Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.
Sluiten
