#
Inloggen
Registreren
Order0
English

Bevel Gearboxes KU/I, Type K, 5:1

Bevel Gearboxes KU/I, Type K, 5:1

Op voorraad

Filter artikelen

Size

Type

Input Shaft d1 (mm)

Output Shaft d2 (mm)

Rim Length b (mm)

max. T2 at 10 min -1 (Nm)

max. T2 at 50 min -1 (Nm)

max. T2 at 100 min -1 (Nm)

max. T2 at 150 min -1 (Nm)

max. T2 at 200 min -1 (Nm)

max. T2 at 300 min -1 (Nm)

max. T2 at 600 min -1 (Nm)

max. P1 at 50 min -1 (kW)

max. P1 at 250 min -1 (kW)

max. P1 at 500 min -1 (kW)

max. P1 at 750 min -1 (kW)

max. P1 at 1000 min -1 (kW)

max. P1 at 1500 min -1 (kW)

max. P1 at 3000 min -1 (kW)

Weight (kg)

Wis alle filters

Omschrijving

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down.

Op voorraad

Filter artikelen

Size

Type

Input Shaft d1 (mm)

Output Shaft d2 (mm)

Rim Length b (mm)

max. T2 at 10 min -1 (Nm)

max. T2 at 50 min -1 (Nm)

max. T2 at 100 min -1 (Nm)

max. T2 at 150 min -1 (Nm)

max. T2 at 200 min -1 (Nm)

max. T2 at 300 min -1 (Nm)

max. T2 at 600 min -1 (Nm)

max. P1 at 50 min -1 (kW)

max. P1 at 250 min -1 (kW)

max. P1 at 500 min -1 (kW)

max. P1 at 750 min -1 (kW)

max. P1 at 1000 min -1 (kW)

max. P1 at 1500 min -1 (kW)

max. P1 at 3000 min -1 (kW)

Weight (kg)

Wis alle filters

Artikelnummer
MAD/41200405
Size 1
Type 10
Input Shaft d1 (mm) 12
Output Shaft d2 (mm) 18
Rim Length b (mm) 90
max. T2 at 10 min -1 (Nm) 37
max. T2 at 50 min -1 (Nm) 36
max. T2 at 100 min -1 (Nm) 34
max. T2 at 150 min -1 (Nm) 32
max. T2 at 200 min -1 (Nm) 31
max. T2 at 300 min -1 (Nm) 27
max. T2 at 600 min -1 (Nm) 23
max. P1 at 50 min -1 (kW) 0,04
max. P1 at 250 min -1 (kW) 0,2
max. P1 at 500 min -1 (kW) 0,37
max. P1 at 750 min -1 (kW) 0,53
max. P1 at 1000 min -1 (kW) 0,68
max. P1 at 1500 min -1 (kW) 0,89
max. P1 at 3000 min -1 (kW) 1,52
Weight (kg) 5,5
MAD/41200505
Size 1
Type 20
Input Shaft d1 (mm) 12
Output Shaft d2 (mm) 18
Rim Length b (mm) 90
max. T2 at 10 min -1 (Nm) 37
max. T2 at 50 min -1 (Nm) 36
max. T2 at 100 min -1 (Nm) 34
max. T2 at 150 min -1 (Nm) 32
max. T2 at 200 min -1 (Nm) 31
max. T2 at 300 min -1 (Nm) 27
max. T2 at 600 min -1 (Nm) 23
max. P1 at 50 min -1 (kW) 0,04
max. P1 at 250 min -1 (kW) 0,2
max. P1 at 500 min -1 (kW) 0,37
max. P1 at 750 min -1 (kW) 0,53
max. P1 at 1000 min -1 (kW) 0,68
max. P1 at 1500 min -1 (kW) 0,89
max. P1 at 3000 min -1 (kW) 1,52
Weight (kg) 5,5
MAD/41200705
Size 2
Type 10
Input Shaft d1 (mm) 15
Output Shaft d2 (mm) 25
Rim Length b (mm) 120
max. T2 at 10 min -1 (Nm) 95
max. T2 at 50 min -1 (Nm) 92
max. T2 at 100 min -1 (Nm) 89
max. T2 at 150 min -1 (Nm) 86
max. T2 at 200 min -1 (Nm) 80
max. T2 at 300 min -1 (Nm) 72
max. T2 at 600 min -1 (Nm) 60
max. P1 at 50 min -1 (kW) 0,1
max. P1 at 250 min -1 (kW) 0,51
max. P1 at 500 min -1 (kW) 0,98
max. P1 at 750 min -1 (kW) 1,42
max. P1 at 1000 min -1 (kW) 1,76
max. P1 at 1500 min -1 (kW) 2,38
max. P1 at 3000 min -1 (kW) 3,97
Weight (kg) 12
MAD/41200805
Size 2
Type 20
Input Shaft d1 (mm) 15
Output Shaft d2 (mm) 25
Rim Length b (mm) 120
max. T2 at 10 min -1 (Nm) 95
max. T2 at 50 min -1 (Nm) 92
max. T2 at 100 min -1 (Nm) 89
max. T2 at 150 min -1 (Nm) 86
max. T2 at 200 min -1 (Nm) 80
max. T2 at 300 min -1 (Nm) 72
max. T2 at 600 min -1 (Nm) 60
max. P1 at 50 min -1 (kW) 0,1
max. P1 at 250 min -1 (kW) 0,51
max. P1 at 500 min -1 (kW) 0,98
max. P1 at 750 min -1 (kW) 1,42
max. P1 at 1000 min -1 (kW) 1,76
max. P1 at 1500 min -1 (kW) 2,38
max. P1 at 3000 min -1 (kW) 3,97
Weight (kg) 12
MAD/41201005
Size 25
Type 10
Input Shaft d1 (mm) 24
Output Shaft d2 (mm) 35
Rim Length b (mm) 160
max. T2 at 10 min -1 (Nm) 280
max. T2 at 50 min -1 (Nm) 270
max. T2 at 100 min -1 (Nm) 250
max. T2 at 150 min -1 (Nm) 240
max. T2 at 200 min -1 (Nm) 225
max. T2 at 300 min -1 (Nm) 215
max. T2 at 600 min -1 (Nm) 180
max. P1 at 50 min -1 (kW) 0,32
max. P1 at 250 min -1 (kW) 1,49
max. P1 at 500 min -1 (kW) 2,76
max. P1 at 750 min -1 (kW) 3,97
max. P1 at 1000 min -1 (kW) 4,96
max. P1 at 1500 min -1 (kW) 7,11
max. P1 at 3000 min -1 (kW) 11,9
Weight (kg) 24
MAD/41201105
Size 25
Type 20
Input Shaft d1 (mm) 24
Output Shaft d2 (mm) 35
Rim Length b (mm) 160
max. T2 at 10 min -1 (Nm) 280
max. T2 at 50 min -1 (Nm) 270
max. T2 at 100 min -1 (Nm) 250
max. T2 at 150 min -1 (Nm) 240
max. T2 at 200 min -1 (Nm) 225
max. T2 at 300 min -1 (Nm) 215
max. T2 at 600 min -1 (Nm) 180
max. P1 at 50 min -1 (kW) 0,32
max. P1 at 250 min -1 (kW) 1,49
max. P1 at 500 min -1 (kW) 2,76
max. P1 at 750 min -1 (kW) 3,97
max. P1 at 1000 min -1 (kW) 4,96
max. P1 at 1500 min -1 (kW) 7,11
max. P1 at 3000 min -1 (kW) 11,9
Weight (kg) 24
MAD/41201305
Size 30
Type 10
Input Shaft d1 (mm) 28
Output Shaft d2 (mm) 42
Rim Length b (mm) 200
max. T2 at 10 min -1 (Nm) 525
max. T2 at 50 min -1 (Nm) 505
max. T2 at 100 min -1 (Nm) 470
max. T2 at 150 min -1 (Nm) 440
max. T2 at 200 min -1 (Nm) 420
max. T2 at 300 min -1 (Nm) 380
max. T2 at 600 min -1 (Nm) 300
max. P1 at 50 min -1 (kW) 0,58
max. P1 at 250 min -1 (kW) 2,78
max. P1 at 500 min -1 (kW) 5,18
max. P1 at 750 min -1 (kW) 7,27
max. P1 at 1000 min -1 (kW) 9,26
max. P1 at 1500 min -1 (kW) 12,57
max. P1 at 3000 min -1 (kW) 19,84
Weight (kg) 48
MAD/41201405
Size 30
Type 20
Input Shaft d1 (mm) 28
Output Shaft d2 (mm) 42
Rim Length b (mm) 200
max. T2 at 10 min -1 (Nm) 525
max. T2 at 50 min -1 (Nm) 505
max. T2 at 100 min -1 (Nm) 470
max. T2 at 150 min -1 (Nm) 440
max. T2 at 200 min -1 (Nm) 420
max. T2 at 300 min -1 (Nm) 380
max. T2 at 600 min -1 (Nm) 300
max. P1 at 50 min -1 (kW) 0,58
max. P1 at 250 min -1 (kW) 2,78
max. P1 at 500 min -1 (kW) 5,18
max. P1 at 750 min -1 (kW) 7,27
max. P1 at 1000 min -1 (kW) 9,26
max. P1 at 1500 min -1 (kW) 12,57
max. P1 at 3000 min -1 (kW) 19,84
Weight (kg) 48
Size Type Input Shaft d1 (mm) Output Shaft d2 (mm) Rim Length b (mm) max. T2 at 10 min -1 (Nm) max. T2 at 50 min -1 (Nm) max. T2 at 100 min -1 (Nm) max. T2 at 150 min -1 (Nm) max. T2 at 200 min -1 (Nm) max. T2 at 300 min -1 (Nm) max. T2 at 600 min -1 (Nm) max. P1 at 50 min -1 (kW) max. P1 at 250 min -1 (kW) max. P1 at 500 min -1 (kW) max. P1 at 750 min -1 (kW) max. P1 at 1000 min -1 (kW) max. P1 at 1500 min -1 (kW) max. P1 at 3000 min -1 (kW) Weight (kg)
1 10 12 18 90 37 36 34 32 31 27 23 0,04 0,2 0,37 0,53 0,68 0,89 1,52 5,5
1 20 12 18 90 37 36 34 32 31 27 23 0,04 0,2 0,37 0,53 0,68 0,89 1,52 5,5
2 10 15 25 120 95 92 89 86 80 72 60 0,1 0,51 0,98 1,42 1,76 2,38 3,97 12
2 20 15 25 120 95 92 89 86 80 72 60 0,1 0,51 0,98 1,42 1,76 2,38 3,97 12
25 10 24 35 160 280 270 250 240 225 215 180 0,32 1,49 2,76 3,97 4,96 7,11 11,9 24
25 20 24 35 160 280 270 250 240 225 215 180 0,32 1,49 2,76 3,97 4,96 7,11 11,9 24
30 10 28 42 200 525 505 470 440 420 380 300 0,58 2,78 5,18 7,27 9,26 12,57 19,84 48
30 20 28 42 200 525 505 470 440 420 380 300 0,58 2,78 5,18 7,27 9,26 12,57 19,84 48
Adviesprijs Prijs
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order

Contact

Turfschipper 27
2292 JC Wateringen
Nederland

0174 - 20 49 00
klantenservice@bernardsanders.com

Over ons

Klantenservice

Voorwaarden


IP Bernard Sanders Aandrijftechniek B.V. maakt gebruik van functionele en analytische cookies (en daarmee vergelijkbare technieken). Meer informatie over het gebruik hiervan vindt u in ons Privacy Statement.

Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.

Sluiten