#
Inloggen
Registreren
Order0
English

Bevel Gearboxes KU/I, Type H, 2:1

Bevel Gearboxes KU/I, Type H, 2:1

Op voorraad

Filter artikelen

Size

Type

Input Shaft d1 (mm)

Output Shaft d2 (mm)

Rim Length b (mm)

max. T2 at 25 min -1 (Nm)

max. T2 at 125 min -1 (Nm)

max. T2 at 250 min -1 (Nm)

max. T2 at 375 min -1 (Nm)

max. T2 at 500 min -1 (Nm)

max. T2 at 750 min -1 (Nm)

max. T2 at 1500 min -1 (Nm)

max. P1 at 50 min -1 (kW)

max. P1 at 250 min -1 (kW)

max. P1 at 500 min -1 (kW)

max. P1 at 750 min -1 (kW)

max. P1 at 1000 min -1 (kW)

max. P1 at 1500 min -1 (kW)

max. P1 at 3000 min -1 (kW)

Weight (kg)

Wis alle filters

Omschrijving

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning.

Op voorraad

Filter artikelen

Size

Type

Input Shaft d1 (mm)

Output Shaft d2 (mm)

Rim Length b (mm)

max. T2 at 25 min -1 (Nm)

max. T2 at 125 min -1 (Nm)

max. T2 at 250 min -1 (Nm)

max. T2 at 375 min -1 (Nm)

max. T2 at 500 min -1 (Nm)

max. T2 at 750 min -1 (Nm)

max. T2 at 1500 min -1 (Nm)

max. P1 at 50 min -1 (kW)

max. P1 at 250 min -1 (kW)

max. P1 at 500 min -1 (kW)

max. P1 at 750 min -1 (kW)

max. P1 at 1000 min -1 (kW)

max. P1 at 1500 min -1 (kW)

max. P1 at 3000 min -1 (kW)

Weight (kg)

Wis alle filters

Artikelnummer
MAD/41206102
Size 0
Type 70
Input Shaft d1 (mm) 12
Output Shaft d2 (mm) 12
Rim Length b (mm) 65
max. T2 at 25 min -1 (Nm) 18
max. T2 at 125 min -1 (Nm) 17
max. T2 at 250 min -1 (Nm) 15
max. T2 at 375 min -1 (Nm) 13
max. T2 at 500 min -1 (Nm) 12
max. T2 at 750 min -1 (Nm) 11
max. T2 at 1500 min -1 (Nm) 10
max. P1 at 50 min -1 (kW) 0,05
max. P1 at 250 min -1 (kW) 0,23
max. P1 at 500 min -1 (kW) 0,41
max. P1 at 750 min -1 (kW) 0,54
max. P1 at 1000 min -1 (kW) 0,66
max. P1 at 1500 min -1 (kW) 0,91
max. P1 at 3000 min -1 (kW) 1,65
Weight (kg) 2,1
MAD/41206202
Size 0
Type 80
Input Shaft d1 (mm) 12
Output Shaft d2 (mm) 12
Rim Length b (mm) 65
max. T2 at 25 min -1 (Nm) 18
max. T2 at 125 min -1 (Nm) 17
max. T2 at 250 min -1 (Nm) 15
max. T2 at 375 min -1 (Nm) 13
max. T2 at 500 min -1 (Nm) 12
max. T2 at 750 min -1 (Nm) 11
max. T2 at 1500 min -1 (Nm) 10
max. P1 at 50 min -1 (kW) 0,05
max. P1 at 250 min -1 (kW) 0,23
max. P1 at 500 min -1 (kW) 0,41
max. P1 at 750 min -1 (kW) 0,54
max. P1 at 1000 min -1 (kW) 0,66
max. P1 at 1500 min -1 (kW) 0,91
max. P1 at 3000 min -1 (kW) 1,65
Weight (kg) 2,1
MAD/41206402
Size 1
Type 70
Input Shaft d1 (mm) 18
Output Shaft d2 (mm) 18
Rim Length b (mm) 90
max. T2 at 25 min -1 (Nm) 37
max. T2 at 125 min -1 (Nm) 36
max. T2 at 250 min -1 (Nm) 34
max. T2 at 375 min -1 (Nm) 32
max. T2 at 500 min -1 (Nm) 31
max. T2 at 750 min -1 (Nm) 27
max. T2 at 1500 min -1 (Nm) 23
max. P1 at 50 min -1 (kW) 0,1
max. P1 at 250 min -1 (kW) 0,5
max. P1 at 500 min -1 (kW) 0,94
max. P1 at 750 min -1 (kW) 1,32
max. P1 at 1000 min -1 (kW) 1,71
max. P1 at 1500 min -1 (kW) 2,23
max. P1 at 3000 min -1 (kW) 3,8
Weight (kg) 5,5
MAD/41206502
Size 1
Type 80
Input Shaft d1 (mm) 18
Output Shaft d2 (mm) 18
Rim Length b (mm) 90
max. T2 at 25 min -1 (Nm) 37
max. T2 at 125 min -1 (Nm) 36
max. T2 at 250 min -1 (Nm) 34
max. T2 at 375 min -1 (Nm) 32
max. T2 at 500 min -1 (Nm) 31
max. T2 at 750 min -1 (Nm) 27
max. T2 at 1500 min -1 (Nm) 23
max. P1 at 50 min -1 (kW) 0,1
max. P1 at 250 min -1 (kW) 0,5
max. P1 at 500 min -1 (kW) 0,94
max. P1 at 750 min -1 (kW) 1,32
max. P1 at 1000 min -1 (kW) 1,71
max. P1 at 1500 min -1 (kW) 2,23
max. P1 at 3000 min -1 (kW) 3,8
Weight (kg) 5,5
MAD/41206702
Size 2
Type 70
Input Shaft d1 (mm) 25
Output Shaft d2 (mm) 25
Rim Length b (mm) 120
max. T2 at 25 min -1 (Nm) 107
max. T2 at 125 min -1 (Nm) 98
max. T2 at 250 min -1 (Nm) 92
max. T2 at 375 min -1 (Nm) 86
max. T2 at 500 min -1 (Nm) 81
max. T2 at 750 min -1 (Nm) 73
max. T2 at 1500 min -1 (Nm) 56
max. P1 at 50 min -1 (kW) 0,29
max. P1 at 250 min -1 (kW) 1,35
max. P1 at 500 min -1 (kW) 2,54
max. P1 at 750 min -1 (kW) 3,55
max. P1 at 1000 min -1 (kW) 4,46
max. P1 at 1500 min -1 (kW) 6,03
max. P1 at 3000 min -1 (kW) 9,26
Weight (kg) 12
MAD/41206802
Size 2
Type 80
Input Shaft d1 (mm) 25
Output Shaft d2 (mm) 25
Rim Length b (mm) 120
max. T2 at 25 min -1 (Nm) 107
max. T2 at 125 min -1 (Nm) 98
max. T2 at 250 min -1 (Nm) 92
max. T2 at 375 min -1 (Nm) 86
max. T2 at 500 min -1 (Nm) 81
max. T2 at 750 min -1 (Nm) 73
max. T2 at 1500 min -1 (Nm) 56
max. P1 at 50 min -1 (kW) 0,29
max. P1 at 250 min -1 (kW) 1,35
max. P1 at 500 min -1 (kW) 2,54
max. P1 at 750 min -1 (kW) 3,55
max. P1 at 1000 min -1 (kW) 4,46
max. P1 at 1500 min -1 (kW) 6,03
max. P1 at 3000 min -1 (kW) 9,26
Weight (kg) 12
MAD/41207002
Size 25
Type 70
Input Shaft d1 (mm) 35
Output Shaft d2 (mm) 35
Rim Length b (mm) 160
max. T2 at 25 min -1 (Nm) 355
max. T2 at 125 min -1 (Nm) 320
max. T2 at 250 min -1 (Nm) 300
max. T2 at 375 min -1 (Nm) 280
max. T2 at 500 min -1 (Nm) 270
max. T2 at 750 min -1 (Nm) 245
max. T2 at 1500 min -1 (Nm) 170
max. P1 at 50 min -1 (kW) 0,98
max. P1 at 250 min -1 (kW) 4,41
max. P1 at 500 min -1 (kW) 8,27
max. P1 at 750 min -1 (kW) 11,57
max. P1 at 1000 min -1 (kW) 14,88
max. P1 at 1500 min -1 (kW) 20,25
max. P1 at 3000 min -1 (kW) 28,11
Weight (kg) 24
MAD/41207102
Size 25
Type 80
Input Shaft d1 (mm) 35
Output Shaft d2 (mm) 35
Rim Length b (mm) 160
max. T2 at 25 min -1 (Nm) 355
max. T2 at 125 min -1 (Nm) 320
max. T2 at 250 min -1 (Nm) 300
max. T2 at 375 min -1 (Nm) 280
max. T2 at 500 min -1 (Nm) 270
max. T2 at 750 min -1 (Nm) 245
max. T2 at 1500 min -1 (Nm) 170
max. P1 at 50 min -1 (kW) 0,98
max. P1 at 250 min -1 (kW) 4,41
max. P1 at 500 min -1 (kW) 8,27
max. P1 at 750 min -1 (kW) 11,57
max. P1 at 1000 min -1 (kW) 14,88
max. P1 at 1500 min -1 (kW) 20,25
max. P1 at 3000 min -1 (kW) 28,11
Weight (kg) 24
MAD/41207302
Size 30
Type 70
Input Shaft d1 (mm) 42
Output Shaft d2 (mm) 42
Rim Length b (mm) 200
max. T2 at 25 min -1 (Nm) 750
max. T2 at 125 min -1 (Nm) 680
max. T2 at 250 min -1 (Nm) 610
max. T2 at 375 min -1 (Nm) 540
max. T2 at 500 min -1 (Nm) 500
max. T2 at 750 min -1 (Nm) 425
max. T2 at 1500 min -1 (Nm) 310
max. P1 at 50 min -1 (kW) 2,07
max. P1 at 250 min -1 (kW) 9,37
max. P1 at 500 min -1 (kW) 16,81
max. P1 at 750 min -1 (kW) 22,32
max. P1 at 1000 min -1 (kW) 27,56
max. P1 at 1500 min -1 (kW) 35,13
max. P1 at 3000 min -1 (kW) 51,26
Weight (kg) 48
MAD/41207402
Size 30
Type 80
Input Shaft d1 (mm) 42
Output Shaft d2 (mm) 42
Rim Length b (mm) 200
max. T2 at 25 min -1 (Nm) 750
max. T2 at 125 min -1 (Nm) 680
max. T2 at 250 min -1 (Nm) 610
max. T2 at 375 min -1 (Nm) 540
max. T2 at 500 min -1 (Nm) 500
max. T2 at 750 min -1 (Nm) 425
max. T2 at 1500 min -1 (Nm) 310
max. P1 at 50 min -1 (kW) 2,07
max. P1 at 250 min -1 (kW) 9,37
max. P1 at 500 min -1 (kW) 16,81
max. P1 at 750 min -1 (kW) 22,32
max. P1 at 1000 min -1 (kW) 27,56
max. P1 at 1500 min -1 (kW) 35,13
max. P1 at 3000 min -1 (kW) 51,26
Weight (kg) 48
Size Type Input Shaft d1 (mm) Output Shaft d2 (mm) Rim Length b (mm) max. T2 at 25 min -1 (Nm) max. T2 at 125 min -1 (Nm) max. T2 at 250 min -1 (Nm) max. T2 at 375 min -1 (Nm) max. T2 at 500 min -1 (Nm) max. T2 at 750 min -1 (Nm) max. T2 at 1500 min -1 (Nm) max. P1 at 50 min -1 (kW) max. P1 at 250 min -1 (kW) max. P1 at 500 min -1 (kW) max. P1 at 750 min -1 (kW) max. P1 at 1000 min -1 (kW) max. P1 at 1500 min -1 (kW) max. P1 at 3000 min -1 (kW) Weight (kg)
0 70 12 12 65 18 17 15 13 12 11 10 0,05 0,23 0,41 0,54 0,66 0,91 1,65 2,1
0 80 12 12 65 18 17 15 13 12 11 10 0,05 0,23 0,41 0,54 0,66 0,91 1,65 2,1
1 70 18 18 90 37 36 34 32 31 27 23 0,1 0,5 0,94 1,32 1,71 2,23 3,8 5,5
1 80 18 18 90 37 36 34 32 31 27 23 0,1 0,5 0,94 1,32 1,71 2,23 3,8 5,5
2 70 25 25 120 107 98 92 86 81 73 56 0,29 1,35 2,54 3,55 4,46 6,03 9,26 12
2 80 25 25 120 107 98 92 86 81 73 56 0,29 1,35 2,54 3,55 4,46 6,03 9,26 12
25 70 35 35 160 355 320 300 280 270 245 170 0,98 4,41 8,27 11,57 14,88 20,25 28,11 24
25 80 35 35 160 355 320 300 280 270 245 170 0,98 4,41 8,27 11,57 14,88 20,25 28,11 24
30 70 42 42 200 750 680 610 540 500 425 310 2,07 9,37 16,81 22,32 27,56 35,13 51,26 48
30 80 42 42 200 750 680 610 540 500 425 310 2,07 9,37 16,81 22,32 27,56 35,13 51,26 48
Adviesprijs Prijs
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order

Contact

Turfschipper 27
2292 JC Wateringen
Nederland

0174 - 20 49 00
klantenservice@bernardsanders.com

Over ons

Klantenservice

Voorwaarden


IP Bernard Sanders Aandrijftechniek B.V. maakt gebruik van functionele en analytische cookies (en daarmee vergelijkbare technieken). Meer informatie over het gebruik hiervan vindt u in ons Privacy Statement.

Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.

Sluiten