#
Inloggen
Registreren
Order0
English

Bevel Gearboxes KU/I, Type H, 6:1

Bevel Gearboxes KU/I, Type H, 6:1

Op voorraad

Filter artikelen

Size

Type

Input Shaft d1 (mm)

Output Shaft d2 (mm)

Rim Length b (mm)

max. T2 at 8 min -1 (Nm)

max. T2 at 42 min -1 (Nm)

max. T2 at 83 min -1 (Nm)

max. T2 at 125 min -1 (Nm)

max. T2 at 167 min -1 (Nm)

max. T2 at 250 min -1 (Nm)

max. T2 at 500 min -1 (Nm)

max. P1 at 50 min -1 (kW)

max. P1 at 250 min -1 (kW)

max. P1 at 500 min -1 (kW)

max. P1 at 750 min -1 (kW)

max. P1 at 1000 min -1 (kW)

max. P1 at 1500 min -1 (kW)

max. P1 at 3000 min -1 (kW)

Weight (kg)

Wis alle filters

Omschrijving

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning.

Op voorraad

Filter artikelen

Size

Type

Input Shaft d1 (mm)

Output Shaft d2 (mm)

Rim Length b (mm)

max. T2 at 8 min -1 (Nm)

max. T2 at 42 min -1 (Nm)

max. T2 at 83 min -1 (Nm)

max. T2 at 125 min -1 (Nm)

max. T2 at 167 min -1 (Nm)

max. T2 at 250 min -1 (Nm)

max. T2 at 500 min -1 (Nm)

max. P1 at 50 min -1 (kW)

max. P1 at 250 min -1 (kW)

max. P1 at 500 min -1 (kW)

max. P1 at 750 min -1 (kW)

max. P1 at 1000 min -1 (kW)

max. P1 at 1500 min -1 (kW)

max. P1 at 3000 min -1 (kW)

Weight (kg)

Wis alle filters

Artikelnummer
MAD/41206406
Size 1
Type 70
Input Shaft d1 (mm) 12
Output Shaft d2 (mm) 18
Rim Length b (mm) 90
max. T2 at 8 min -1 (Nm) 33
max. T2 at 42 min -1 (Nm) 30
max. T2 at 83 min -1 (Nm) 29
max. T2 at 125 min -1 (Nm) 29
max. T2 at 167 min -1 (Nm) 29
max. T2 at 250 min -1 (Nm) 27
max. T2 at 500 min -1 (Nm) 23
max. P1 at 50 min -1 (kW) 0,03
max. P1 at 250 min -1 (kW) 0,14
max. P1 at 500 min -1 (kW) 0,27
max. P1 at 750 min -1 (kW) 0,4
max. P1 at 1000 min -1 (kW) 0,53
max. P1 at 1500 min -1 (kW) 0,74
max. P1 at 3000 min -1 (kW) 1,25
Weight (kg) 5,5
MAD/41206506
Size 1
Type 80
Input Shaft d1 (mm) 12
Output Shaft d2 (mm) 18
Rim Length b (mm) 90
max. T2 at 8 min -1 (Nm) 33
max. T2 at 42 min -1 (Nm) 30
max. T2 at 83 min -1 (Nm) 29
max. T2 at 125 min -1 (Nm) 29
max. T2 at 167 min -1 (Nm) 29
max. T2 at 250 min -1 (Nm) 27
max. T2 at 500 min -1 (Nm) 23
max. P1 at 50 min -1 (kW) 0,03
max. P1 at 250 min -1 (kW) 0,14
max. P1 at 500 min -1 (kW) 0,27
max. P1 at 750 min -1 (kW) 0,4
max. P1 at 1000 min -1 (kW) 0,53
max. P1 at 1500 min -1 (kW) 0,74
max. P1 at 3000 min -1 (kW) 1,25
Weight (kg) 5,5
MAD/41206706
Size 2
Type 70
Input Shaft d1 (mm) 15
Output Shaft d2 (mm) 25
Rim Length b (mm) 120
max. T2 at 8 min -1 (Nm) 71
max. T2 at 42 min -1 (Nm) 69
max. T2 at 83 min -1 (Nm) 68
max. T2 at 125 min -1 (Nm) 68
max. T2 at 167 min -1 (Nm) 66
max. T2 at 250 min -1 (Nm) 64
max. T2 at 500 min -1 (Nm) 54
max. P1 at 50 min -1 (kW) 0,06
max. P1 at 250 min -1 (kW) 0,33
max. P1 at 500 min -1 (kW) 0,63
max. P1 at 750 min -1 (kW) 0,94
max. P1 at 1000 min -1 (kW) 1,22
max. P1 at 1500 min -1 (kW) 1,75
max. P1 at 3000 min -1 (kW) 2,95
Weight (kg) 12
MAD/41206806
Size 2
Type 80
Input Shaft d1 (mm) 15
Output Shaft d2 (mm) 25
Rim Length b (mm) 120
max. T2 at 8 min -1 (Nm) 71
max. T2 at 42 min -1 (Nm) 69
max. T2 at 83 min -1 (Nm) 68
max. T2 at 125 min -1 (Nm) 68
max. T2 at 167 min -1 (Nm) 66
max. T2 at 250 min -1 (Nm) 64
max. T2 at 500 min -1 (Nm) 54
max. P1 at 50 min -1 (kW) 0,06
max. P1 at 250 min -1 (kW) 0,33
max. P1 at 500 min -1 (kW) 0,63
max. P1 at 750 min -1 (kW) 0,94
max. P1 at 1000 min -1 (kW) 1,22
max. P1 at 1500 min -1 (kW) 1,75
max. P1 at 3000 min -1 (kW) 2,95
Weight (kg) 12
MAD/41207006
Size 25
Type 70
Input Shaft d1 (mm) 24
Output Shaft d2 (mm) 35
Rim Length b (mm) 160
max. T2 at 8 min -1 (Nm) 210
max. T2 at 42 min -1 (Nm) 199
max. T2 at 83 min -1 (Nm) 187
max. T2 at 125 min -1 (Nm) 176
max. T2 at 167 min -1 (Nm) 164
max. T2 at 250 min -1 (Nm) 143
max. T2 at 500 min -1 (Nm) 129
max. P1 at 50 min -1 (kW) 0,18
max. P1 at 250 min -1 (kW) 0,92
max. P1 at 500 min -1 (kW) 1,72
max. P1 at 750 min -1 (kW) 2,43
max. P1 at 1000 min -1 (kW) 3,01
max. P1 at 1500 min -1 (kW) 3,95
max. P1 at 3000 min -1 (kW) 7,09
Weight (kg) 24
MAD/41207106
Size 25
Type 80
Input Shaft d1 (mm) 24
Output Shaft d2 (mm) 35
Rim Length b (mm) 160
max. T2 at 8 min -1 (Nm) 210
max. T2 at 42 min -1 (Nm) 199
max. T2 at 83 min -1 (Nm) 187
max. T2 at 125 min -1 (Nm) 176
max. T2 at 167 min -1 (Nm) 164
max. T2 at 250 min -1 (Nm) 143
max. T2 at 500 min -1 (Nm) 129
max. P1 at 50 min -1 (kW) 0,18
max. P1 at 250 min -1 (kW) 0,92
max. P1 at 500 min -1 (kW) 1,72
max. P1 at 750 min -1 (kW) 2,43
max. P1 at 1000 min -1 (kW) 3,01
max. P1 at 1500 min -1 (kW) 3,95
max. P1 at 3000 min -1 (kW) 7,09
Weight (kg) 24
Size Type Input Shaft d1 (mm) Output Shaft d2 (mm) Rim Length b (mm) max. T2 at 8 min -1 (Nm) max. T2 at 42 min -1 (Nm) max. T2 at 83 min -1 (Nm) max. T2 at 125 min -1 (Nm) max. T2 at 167 min -1 (Nm) max. T2 at 250 min -1 (Nm) max. T2 at 500 min -1 (Nm) max. P1 at 50 min -1 (kW) max. P1 at 250 min -1 (kW) max. P1 at 500 min -1 (kW) max. P1 at 750 min -1 (kW) max. P1 at 1000 min -1 (kW) max. P1 at 1500 min -1 (kW) max. P1 at 3000 min -1 (kW) Weight (kg)
1 70 12 18 90 33 30 29 29 29 27 23 0,03 0,14 0,27 0,4 0,53 0,74 1,25 5,5
1 80 12 18 90 33 30 29 29 29 27 23 0,03 0,14 0,27 0,4 0,53 0,74 1,25 5,5
2 70 15 25 120 71 69 68 68 66 64 54 0,06 0,33 0,63 0,94 1,22 1,75 2,95 12
2 80 15 25 120 71 69 68 68 66 64 54 0,06 0,33 0,63 0,94 1,22 1,75 2,95 12
25 70 24 35 160 210 199 187 176 164 143 129 0,18 0,92 1,72 2,43 3,01 3,95 7,09 24
25 80 24 35 160 210 199 187 176 164 143 129 0,18 0,92 1,72 2,43 3,01 3,95 7,09 24
Adviesprijs Prijs
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order

Contact

Turfschipper 27
2292 JC Wateringen
Nederland

0174 - 20 49 00
klantenservice@bernardsanders.com

Over ons

Klantenservice

Voorwaarden


IP Bernard Sanders Aandrijftechniek B.V. maakt gebruik van functionele en analytische cookies (en daarmee vergelijkbare technieken). Meer informatie over het gebruik hiervan vindt u in ons Privacy Statement.

Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.

Sluiten