#

Op voorraad

Filter artikelen

No. of Clutch Disks (pcs)

L (mm)

Bore B +0,03/-0 Side1 (mm)

Bore B +0,03/-0 Side 2 (mm)

Weight (g)

Wis alle filters

Omschrijving

Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt.

Op voorraad

Filter artikelen

No. of Clutch Disks (pcs)

L (mm)

Bore B +0,03/-0 Side1 (mm)

Bore B +0,03/-0 Side 2 (mm)

Weight (g)

Wis alle filters

Artikelnummer
MAD/61040300
MAD/61040400
MAD/61040800
MAD/61040900
Type No. of Clutch Disks (pcs) L (mm) L1 (mm) L2 (mm) D1 (mm) D2 (mm) Bore B +0,03/-0 Side1 (mm) Bore B +0,03/-0 Side 2 (mm) Adjustment Screw Size Seite 1 Adjustment Screw Seite 2 Weight (g) Matching Disk
A 2 26,4 * - 25,8 21,97 6 6 M 3x3, 2x90º - 37 -
A 2 26,4 * - 25,8 21,97 8 8 M 3x3, 2x90º - 37 -
A 6 32,4 * - 25,8 21,97 6 6 M 3x3, 2x90º - 48 -
A 6 32,4 * - 25,8 21,97 8 8 M 3x3, 2x90º - 48 -
Adviesprijs Prijs
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order

Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.

Sluiten