Locking Assemblies BAR, QPQ-Coated, boreholes 5 - 50 mm | IP Bernard Sanders Aandrijftechniek B.V.

Filter artikelen

d (mm)

D (mm)

L (mm)

L1 (mm)

L2 (mm)

M t (transferable at MA) (Nm)

P ax (at MA transferable) (kN)

Surface Pressure Shaft PW (N/mm²)

Surface Pressure Hub PN (N/mm²)

Clamping Bolts Size

Tightening Torque TA (Nm)

No. of Clamping Bolts

Weight (kg)

Wis alle filters

Omschrijving

Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4.

Filter artikelen

d (mm)

D (mm)

L (mm)

L1 (mm)

L2 (mm)

M t (transferable at MA) (Nm)

P ax (at MA transferable) (kN)

Surface Pressure Shaft PW (N/mm²)

Surface Pressure Hub PN (N/mm²)

Clamping Bolts Size

Tightening Torque TA (Nm)

No. of Clamping Bolts

Weight (kg)

Wis alle filters

Pagina
1
2

Artikelnummer

MAD/61570500

d (mm)	5
D (mm)	16
L (mm)	11
L1 (mm)	10,5
L2 (mm)	13,5
M t (transferable at MA) (Nm)	6
P ax (at MA transferable) (kN)	2
Surface Pressure Shaft PW (N/mm²)	150
Surface Pressure Hub PN (N/mm²)	55
Clamping Bolts Size	M2,5 x 10
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	3
Weight (kg)	0,012

MAD/61570600

d (mm)	6
D (mm)	16
L (mm)	11
L1 (mm)	10,5
L2 (mm)	13,5
M t (transferable at MA) (Nm)	9
P ax (at MA transferable) (kN)	3
Surface Pressure Shaft PW (N/mm²)	184
Surface Pressure Hub PN (N/mm²)	69
Clamping Bolts Size	M2,5 x 10
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	3
Weight (kg)	0,012

MAD/61570635

d (mm)	6,35
D (mm)	16
L (mm)	11
L1 (mm)	10,5
L2 (mm)	13,5
M t (transferable at MA) (Nm)	10
P ax (at MA transferable) (kN)	3
Surface Pressure Shaft PW (N/mm²)	180
Surface Pressure Hub PN (N/mm²)	72
Clamping Bolts Size	M2,5 x 10
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	3
Weight (kg)	0,012

MAD/61570800

d (mm)	8
D (mm)	18
L (mm)	11
L1 (mm)	10,5
L2 (mm)	13,5
M t (transferable at MA) (Nm)	12
P ax (at MA transferable) (kN)	3
Surface Pressure Shaft PW (N/mm²)	141
Surface Pressure Hub PN (N/mm²)	62
Clamping Bolts Size	M2,5 x 10
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	3
Weight (kg)	0,015

MAD/61570900

d (mm)	9
D (mm)	20
L (mm)	13
L1 (mm)	12,5
L2 (mm)	15,5
M t (transferable at MA) (Nm)	17
P ax (at MA transferable) (kN)	4
Surface Pressure Shaft PW (N/mm²)	132
Surface Pressure Hub PN (N/mm²)	60
Clamping Bolts Size	M2,5 x 12
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	4
Weight (kg)	0,020

MAD/61571000

d (mm)	10
D (mm)	20
L (mm)	13
L1 (mm)	12,5
L2 (mm)	15,5
M t (transferable at MA) (Nm)	19
P ax (at MA transferable) (kN)	4
Surface Pressure Shaft PW (N/mm²)	120
Surface Pressure Hub PN (N/mm²)	60
Clamping Bolts Size	M2,5 x 12
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	4
Weight (kg)	0,019

MAD/61571100

d (mm)	11
D (mm)	22
L (mm)	13
L1 (mm)	12,5
L2 (mm)	15,5
M t (transferable at MA) (Nm)	21
P ax (at MA transferable) (kN)	4
Surface Pressure Shaft PW (N/mm²)	108
Surface Pressure Hub PN (N/mm²)	54
Clamping Bolts Size	M2,5 x 12
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	4
Weight (kg)	0,024

MAD/61571200

d (mm)	12
D (mm)	22
L (mm)	13
L1 (mm)	12,5
L2 (mm)	15,5
M t (transferable at MA) (Nm)	24
P ax (at MA transferable) (kN)	4
Surface Pressure Shaft PW (N/mm²)	102
Surface Pressure Hub PN (N/mm²)	55
Clamping Bolts Size	M2,5 x 12
Tightening Torque TA (Nm)	1,2
No. of Clamping Bolts	4
Weight (kg)	0,022

MAD/61571400

d (mm)	14
D (mm)	26
L (mm)	17
L1 (mm)	16,5
L2 (mm)	20,0
M t (transferable at MA) (Nm)	40
P ax (at MA transferable) (kN)	6
Surface Pressure Shaft PW (N/mm²)	94
Surface Pressure Hub PN (N/mm²)	50
Clamping Bolts Size	M3 x 16
Tightening Torque TA (Nm)	2,1
No. of Clamping Bolts	4
Weight (kg)	0,039

MAD/61571500

d (mm)	15
D (mm)	28
L (mm)	17
L1 (mm)	16,5
L2 (mm)	20,0
M t (transferable at MA) (Nm)	44
P ax (at MA transferable) (kN)	6
Surface Pressure Shaft PW (N/mm²)	93
Surface Pressure Hub PN (N/mm²)	50
Clamping Bolts Size	M3 x 16
Tightening Torque TA (Nm)	2,1
No. of Clamping Bolts	4
Weight (kg)	0,044

MAD/61571600

d (mm)	16
D (mm)	32
L (mm)	17
L1 (mm)	16,5
L2 (mm)	21,0
M t (transferable at MA) (Nm)	86
P ax (at MA transferable) (kN)	10
Surface Pressure Shaft PW (N/mm²)	158
Surface Pressure Hub PN (N/mm²)	79
Clamping Bolts Size	M4 x 16
Tightening Torque TA (Nm)	4,9
No. of Clamping Bolts	4
Weight (kg)	0,067

MAD/61571700

d (mm)	17
D (mm)	35
L (mm)	21
L1 (mm)	20,5
L2 (mm)	25,0
M t (transferable at MA) (Nm)	88
P ax (at MA transferable) (kN)	10
Surface Pressure Shaft PW (N/mm²)	116
Surface Pressure Hub PN (N/mm²)	56
Clamping Bolts Size	M4 x 20
Tightening Torque TA (Nm)	4,9
No. of Clamping Bolts	4
Weight (kg)	0,090

MAD/61571800

d (mm)	18
D (mm)	35
L (mm)	21
L1 (mm)	20,5
L2 (mm)	25,0
M t (transferable at MA) (Nm)	94
P ax (at MA transferable) (kN)	11
Surface Pressure Shaft PW (N/mm²)	110
Surface Pressure Hub PN (N/mm²)	57
Clamping Bolts Size	M4 x 20
Tightening Torque TA (Nm)	4,9
No. of Clamping Bolts	4
Weight (kg)	0,087

MAD/61571900

d (mm)	19
D (mm)	35
L (mm)	21
L1 (mm)	20,5
L2 (mm)	25,0
M t (transferable at MA) (Nm)	99
P ax (at MA transferable) (kN)	11
Surface Pressure Shaft PW (N/mm²)	104
Surface Pressure Hub PN (N/mm²)	56
Clamping Bolts Size	M4 x 20
Tightening Torque TA (Nm)	4,9
No. of Clamping Bolts	4
Weight (kg)	0,080

MAD/61572000

d (mm)	20
D (mm)	38
L (mm)	21
L1 (mm)	20,5
L2 (mm)	26,0
M t (transferable at MA) (Nm)	179
P ax (at MA transferable) (kN)	17
Surface Pressure Shaft PW (N/mm²)	169
Surface Pressure Hub PN (N/mm²)	89
Clamping Bolts Size	M5 x 20
Tightening Torque TA (Nm)	10
No. of Clamping Bolts	4
Weight (kg)	0,100

d (mm)	D (mm)	L (mm)	L1 (mm)	L2 (mm)	M t (transferable at MA) (Nm)	P ax (at MA transferable) (kN)	Surface Pressure Shaft PW (N/mm²)	Surface Pressure Hub PN (N/mm²)	Clamping Bolts Size	Tightening Torque TA (Nm)	No. of Clamping Bolts	Weight (kg)
5	16	11	10,5	13,5	6	2	150	55	M2,5 x 10	1,2	3	0,012
6	16	11	10,5	13,5	9	3	184	69	M2,5 x 10	1,2	3	0,012
6,35	16	11	10,5	13,5	10	3	180	72	M2,5 x 10	1,2	3	0,012
8	18	11	10,5	13,5	12	3	141	62	M2,5 x 10	1,2	3	0,015
9	20	13	12,5	15,5	17	4	132	60	M2,5 x 12	1,2	4	0,020
10	20	13	12,5	15,5	19	4	120	60	M2,5 x 12	1,2	4	0,019
11	22	13	12,5	15,5	21	4	108	54	M2,5 x 12	1,2	4	0,024
12	22	13	12,5	15,5	24	4	102	55	M2,5 x 12	1,2	4	0,022
14	26	17	16,5	20,0	40	6	94	50	M3 x 16	2,1	4	0,039
15	28	17	16,5	20,0	44	6	93	50	M3 x 16	2,1	4	0,044
16	32	17	16,5	21,0	86	10	158	79	M4 x 16	4,9	4	0,067
17	35	21	20,5	25,0	88	10	116	56	M4 x 20	4,9	4	0,090
18	35	21	20,5	25,0	94	11	110	57	M4 x 20	4,9	4	0,087
19	35	21	20,5	25,0	99	11	104	56	M4 x 20	4,9	4	0,080
20	38	21	20,5	26,0	179	17	169	89	M5 x 20	10	4	0,100

	Adviesprijs	Prijs
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order