#

Op voorraad

Filter artikelen

Type

d1 (mm)

d2 (mm)

l1 (mm)

l2 (mm)

l3 (mm)

b (mm)

s (mm)

Socket Bore H8 (mm)

Spring Force *F1 (N)

*F2 (N)

Weight (g)

Wis alle filters

Omschrijving

Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average

Op voorraad

Filter artikelen

Type

d1 (mm)

d2 (mm)

l1 (mm)

l2 (mm)

l3 (mm)

b (mm)

s (mm)

Socket Bore H8 (mm)

Spring Force *F1 (N)

*F2 (N)

Weight (g)

Wis alle filters

Artikelnummer
MAD/65492800
MAD/65493000
MAD/65493200
MAD/65493400
MAD/65495000
MAD/65495200
Type d1 (mm) d2 (mm) l1 (mm) l2 (mm) l3 (mm) b (mm) s (mm) Socket Bore H8 (mm) Spring Force *F1 (N) *F2 (N) Weight (g)
A 8 3,0 25 3,6 6 3,2 0,9 8 2,5 6,5 8,7
A 10 4,0 30 4,2 7 4,0 1,0 10 4,5 9,0 17,0
A 12 5,0 35 4,8 9 5,0 1,5 12 6,5 13,0 29,0
A 14 6,5 40 5,8 10 5,4 1,8 14 8,0 18,0 43,0
B 10 5,5 30 7,0 8 4,5 1,0 10 50,0 160,0 8,6
B 12 6,5 35 8,0 9 5,5 1,5 12 60,0 270,0 13,0
Adviesprijs Prijs
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order

Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.

Sluiten