Op voorraad
Type
W31) (Nm/Hub)
W3max2) (Nm/Hub)
Max. Travel (mm)
A (mm)
B (mm)
C (mm)
L1 (mm)
L2 (mm)
M (Thread)
Weight (g)
Material: Co-Polyester Elastomer. The profile damper TR is a maintenance-free, self-contained damping element. The radial deformation provides a very soft deceleration with a progressive energy absorption towards the end of the stroke. The excellent temperature characteristic of the material provides consistent damping performance over a temperature range of -40°C to +90°C. The low installed weight, the economic price and the long operating life of up to 1 million cycles makes this an attractive alternative to hydraulic end position damping, if the moving mass does not need to stop in an exact datum position and it is not necessary to absorb 100% of the incoming energy. The life cycle is up to 20 times longer than for urethene dampers and up to ten times longer than for rubber springs. Environment: Resistant to oil, grease seawater and to microbe or chemical attack. Excellent UV and ozone resistance. Material does not absorb water or swell. Dynamic Force Range: 550 N to 21,000 N. Temperature Range: -40°C to +90°C. Energy Absorption: 39% to 62%. Material Hardness: Shore 55D. Mounting: in any position. Impact Velocity range: up to max. 5 m/s. Mounting Bolt Torque: M5: 4 Nm. M6: 6 Nm. M8: 20 Nm. On request: special strokes, characteristics, spring rates, sizes and materials. Download Energy-Stroke Characteristics 0.7 MB 1) Max. energy capacity per cycle for continuous use. 2) For a single cycle, e.g. an emergency stop.
Op voorraad
Type
W31) (Nm/Hub)
W3max2) (Nm/Hub)
Max. Travel (mm)
A (mm)
B (mm)
C (mm)
L1 (mm)
L2 (mm)
M (Thread)
Weight (g)
| Artikelnummer | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MAD/69133000
|
||||||||||||||||||||||||
MAD/69133900
|
||||||||||||||||||||||||
MAD/69134500
|
||||||||||||||||||||||||
MAD/69135200
|
||||||||||||||||||||||||
MAD/69136400
|
||||||||||||||||||||||||
MAD/69136800
|
||||||||||||||||||||||||
MAD/69137900
|
||||||||||||||||||||||||
MAD/69138600
|
||||||||||||||||||||||||
MAD/69138700
|
||||||||||||||||||||||||
MAD/69139500
|
||||||||||||||||||||||||
MAD/69139800
|
| Type | Bemerkung | W31) (Nm/Hub) | W3max2) (Nm/Hub) | Max. Travel (mm) | A (mm) | B (mm) | C (mm) | L1 (mm) | L2 (mm) | M (Thread) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 30-15H | NEU | 2,7 | 5,7 | 15 | 30 | 13 | 38 | 5 | 23 | M5 | 9 |
| 39-19H | NEU | 6 | 18 | 19 | 39 | 19 | 50 | 5 | 30 | M5 | 13 |
| 45-23H | NEU | 8,7 | 24 | 23 | 45 | 20 | 58 | 5 | 36 | M5 | 19 |
| 52-32H | NEU | 11,7 | 20 | 32 | 52 | 34 | 68 | 5 | 42 | M5 | 30 |
| 64-41H | NEU | 25 | 46 | 41 | 64 | 43 | 87 | 5 | 53 | M5 | 54 |
| 68-37H | NEU | 66,5 | 98 | 37 | 68 | 46 | 88 | 5 | 56 | M5 | 95 |
| 79-42H | NEU | 81,5 | 106 | 42 | 79 | 46 | 102 | 6 | 64 | M6 | 107 |
| 86-45H | NEU | 124 | 206 | 45 | 86 | 51 | 109 | 6 | 69 | M6 | 152 |
| 87-46H | NEU | 158 | 261 | 46 | 86 | 67 | 111 | 8 | 68 | M8 | 188 |
| 95-50H | NEU | 228 | 34 | 50 | 95 | 82 | 124 | 8 | 77 | M8 | 281 |
| 102-56H | NEU | 290 | 427 | 56 | 102 | 81 | 133 | 8 | 84 | M8 | 334 |
| Adviesprijs | Prijs | |||
|---|---|---|---|---|
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
|||
|
|
Toevoegen aan
order |
Turfschipper 27
2292 JC Wateringen
Nederland
Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.
Sluiten
