Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm.
Pitch (mm) | 5 |
---|---|
Modul | 1,59 |
Nominal Length L (mm) | 2000 |
D (mm) | 15 |
h0 (mm) | 13,4 |
ha (mm) | 15 |
b (mm) | 9,4 |
Weight (kg) | 2,56 |