Material: Steel C45KG, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention:These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions.
| Module | 1,0 |
|---|---|
| Material | Stahl |
| b (mm) | 10 |
| ha (mm) | 10 |
| L (mm) | 1000 |
| h0 (mm) | 9,0 |
| Weight (g) | 685 |
