Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch.
Module | 0,5 |
---|---|
b (mm) | 2 |
ha (mm) | 4 |
Nominal Length L* (mm) | 250 |
h0 (mm) | 3,5 |
Material | Ms58 |
Weight (g) | 14 |