Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch.
| Module | 1,0 |
|---|---|
| b (mm) | 10 |
| ha (mm) | 10 |
| Nominal Length L* (mm) | 250 |
| h0 (mm) | 9,0 |
| Material | Ms58 |
| Weight (g) | 184 |
