Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Transmission (i) | 1:1 (24/24) |
---|---|
Module | 0,5 |
No. of Teeth | 24 |
da (mm) | 12,7 |
d (mm) | 12 |
ND (mm) | 8 |
NL (mm) | 4,0 |
L1 (mm) | 6,4 |
L (mm) | 7,0 |
S (mm) | 5,0 |
b (mm) | 3 |
BH7 (mm) | 4 |
E (mm) | 10,70 |
Admissible MD (Ncm) | 3,0 |
Weight (g) | 3 |
Corresponding Counter Wheel (Article-No.) | 35021500 |