Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Transmission (i) | 1:1 (50/50) |
---|---|
Module | 0,5 |
No. of Teeth | 50 |
da (mm) | 25,7 |
d (mm) | 25 |
ND (mm) | 14 |
NL (mm) | 5,0 |
L1 (mm) | 8,5 |
L (mm) | 9,5 |
S (mm) | 7,5 |
b (mm) | 3 |
BH7 (mm) | 4 |
E (mm) | 19,60 |
Admissible MD (Ncm) | 18,0 |
Weight (g) | 16 |
Corresponding Counter Wheel (Article-No.) | 35023200 |