Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
| Transmission (i) | 1:1 (30/30) |
|---|---|
| Module | 1,0 |
| No. of Teeth | 30 |
| da (mm) | 31,4 |
| d (mm) | 30 |
| ND (mm) | 16,0 |
| NL (mm) | 7,0 |
| L1 (mm) | 11,5 |
| L (mm) | 13,1 |
| S (mm) | 9,7 |
| b (mm) | 5 |
| BH7 (mm) | 5 |
| E (mm) | 24,0 |
| Admissible MD (Ncm) | 40,0 |
| Weight (g) | 33 |
| Corresponding Counter Wheel (Article-No.) | 35052000 |
