Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
| Transmission (i) | 4:1 (60/15) |
|---|---|
| Module | 1,0 |
| No. of Teeth | 60 |
| da (mm) | 60,3 |
| d (mm) | 60 |
| ND (mm) | 16,0 |
| NL (mm) | 8,0 |
| L1 (mm) | 12,5 |
| L (mm) | 14,6 |
| S (mm) | 13,6 |
| b (mm) | 5 |
| BH7 (mm) | 6 |
| E (mm) | 20,5 |
| Admissible MD (Ncm) | 48,8 |
| Weight (g) | 110 |
| Corresponding Counter Wheel (Article-No.) | 35059200 |
