Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
| Transmission (i) | 2:1 (15/30) |
|---|---|
| Module | 1 |
| No. of Teeth | 15 |
| da (mm) | 16,8 |
| d (mm) | 15 |
| ND (mm) | 12,2 |
| NL (mm) | 10,6 |
| L1 (mm) | 17 |
| L (mm) | 17 |
| b (mm) | 6,6 |
| B (mm) | 5 |
| E (mm) | 26,4 |
| Admissible MD (Ncm) | 12,6 |
| Weight (g) | 2,2 |
| Corresponding Counter Wheel (Article-No.) | 35555701 |
