Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Transmission (i) | 1:1 (16/16) |
---|---|
Module | 2 |
No. of Teeth | 16 |
da (mm) | 34,9 |
d (mm) | 32 |
ND (mm) | 21,9 |
NL (mm) | 9,6 |
L1 (mm) | 18,3 |
L (mm) | 21,2 |
b (mm) | 10 |
B (mm) | 10 |
E (mm) | 30,4 |
Admissible MD (Ncm) | 77 |
Weight (g) | 9,70 |
Corresponding Counter Wheel (Article-No.) | 35600701 |