Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Transmission (i) | 1:1 (16/16) |
---|---|
Module | 3 |
No. of Teeth | 16 |
da (mm) | 52,3 |
d (mm) | 48 |
ND (mm) | 28,8 |
NL (mm) | 13,2 |
L1 (mm) | 25,8 |
L (mm) | 29,2 |
b (mm) | 13,8 |
B (mm) | 14 |
E (mm) | 43 |
Admissible MD (Ncm) | 263 |
Weight (g) | 27,8 |
Corresponding Counter Wheel (Article-No.) | 35640701 |