Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Transmission (i) | 1,5:1 (16/24) |
---|---|
Module | 1,0 |
No. of Teeth | 16 |
da (mm) | 18,1 |
d (mm) | 16 |
ND (mm) | 13 |
NL (mm) | 6,9 |
L1 (mm) | 11 |
L (mm) | 12,0 |
S (mm) | 8,7 |
b (mm) | 4,3 |
BH7 (mm) | 5 |
E (mm) | 20 |
Admissible MD (Nm) | 0,066 |
Weight (g) | 10 |
Corresponding Counter Wheel (Article-No.) | 36054900 |