Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Transmission (i) | 2:1 (20/40) |
---|---|
Module | 1,5 |
No. of Teeth | 40 |
da (mm) | 60,9 |
d (mm) | 60 |
ND (mm) | 40 |
NL (mm) | 12 |
L1 (mm) | 19 |
L (mm) | 22,0 |
S (mm) | 17,9 |
b (mm) | 10,1 |
BH7 (mm) | 15 |
E (mm) | 32 |
Admissible MD (Nm) | 1,08 |
Weight (g) | 234 |
Corresponding Counter Wheel (Article-No.) | 36076000 |