Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Transmission (i) | 3:1 (16/48) |
---|---|
Module | 1,5 |
No. of Teeth | 48 |
da (mm) | 72,6 |
d (mm) | 72 |
ND (mm) | 50 |
NL (mm) | 12 |
L1 (mm) | 20 |
L (mm) | 24,1 |
S (mm) | 20,8 |
b (mm) | 11,4 |
BH7 (mm) | 15 |
E (mm) | 32 |
Admissible MD (Nm) | 1,14 |
Weight (g) | 405 |
Corresponding Counter Wheel (Article-No.) | 36078000 |