Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
| Transmission (i) | 2:1 (15/30) |
|---|---|
| Module | 1,5 |
| No. of Teeth | 30 |
| da (mm) | 45,9 |
| d (mm) | 45,0 |
| ND (mm) | 30 |
| NL (mm) | 12,0 |
| L1 (mm) | 18 |
| L (mm) | 20,7 |
| S (mm) | 17,6 |
| b (mm) | 7,6 |
| BH7 (mm) | 10 |
| E (mm) | 28 |
| Admissible MD (Nm) | 0,54 |
| Weight (kg) | 0,124 |
| Corresponding Counter Wheel (Article-No.) | 36099756 |
