Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Transmission (i) | 3:1 (16/48) |
---|---|
Module | 1,5 |
No. of Teeth | 16 |
da (mm) | 28,0 |
d (mm) | 24,0 |
ND (mm) | 18 |
NL (mm) | 11,0 |
L1 (mm) | 21 |
L (mm) | 23,2 |
S (mm) | 12,7 |
b (mm) | 11,4 |
BH7 (mm) | 8 |
E (mm) | 48 |
Admissible MD (Nm) | 0,45 |
Weight (kg) | 0,042 |
Corresponding Counter Wheel (Article-No.) | 36099781 |