Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Transmission (i) | 1,5:1 (20/30) |
---|---|
Module | 2,5 |
No. of Teeth | 30 |
da (mm) | 77,9 |
d (mm) | 75 |
ND (mm) | 50 |
NL (mm) | 14 |
L1 (mm) | 27 |
L (mm) | 31,1 |
S (mm) | 22,2 |
b (mm) | 18 |
BH7 (mm) | 15 |
E (mm) | 45 |
Admissible MD (Nm) | 10,2 |
Weight (g) | 550 |
Corresponding Counter Wheel (Article-No.) | 36115200 |