Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
| Transmission (i) | 2:1 (15/30) |
|---|---|
| Module | 3,0 |
| No. of Teeth | 30 |
| da (mm) | 92,8 |
| d (mm) | 90 |
| ND (mm) | 50 |
| NL (mm) | 10,0 |
| L1 (mm) | 26 |
| L (mm) | 30,7 |
| S (mm) | 22,3 |
| b (mm) | 22 |
| BH7 (mm) | 20 |
| E (mm) | 42 |
| Admissible MD (Nm) | 12,2 |
| Weight (g) | 750 |
| Corresponding Counter Wheel (Article-No.) | 36145600 |
