Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Transmission (i) | 2,5:1 (18/45) |
---|---|
Module | 3,0 |
No. of Teeth | 18 |
da (mm) | 59,8 |
d (mm) | 54 |
ND (mm) | 40 |
NL (mm) | 11,7 |
L1 (mm) | 36 |
L (mm) | 38,4 |
S (mm) | 15,7 |
b (mm) | 25 |
BH7 (mm) | 15 |
E (mm) | 82 |
Admissible MD (Nm) | 12,8 |
Weight (g) | 380 |
Corresponding Counter Wheel (Article-No.) | 36146900 |