Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Transmission (i) | 2,5:1 (18/45) |
---|---|
Module | 3,0 |
No. of Teeth | 45 |
da (mm) | 137,7 |
d (mm) | 135 |
ND (mm) | 70 |
NL (mm) | 18 |
L1 (mm) | 34 |
L (mm) | 39,0 |
S (mm) | 30,9 |
b (mm) | 25 |
BH7 (mm) | 30 |
E (mm) | 55 |
Admissible MD (Nm) | 32,0 |
Weight (g) | 1900 |
Corresponding Counter Wheel (Article-No.) | 36146800 |