Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
| Transmission (i) | 3:1 (16/48) |
|---|---|
| Module | 3,0 |
| No. of Teeth | 48 |
| da (mm) | 145,9 |
| d (mm) | 144 |
| ND (mm) | 70 |
| NL (mm) | 18 |
| L1 (mm) | 34 |
| L (mm) | 38,7 |
| S (mm) | 32,0 |
| b (mm) | 25 |
| BH7 (mm) | 30 |
| E (mm) | 53 |
| Admissible MD (Nm) | 30,0 |
| Weight (g) | 2300 |
| Corresponding Counter Wheel (Article-No.) | 36148000 |
