Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
| Transmission (i) | 1:1 (16/16) |
|---|---|
| Module | 2,5 |
| No. of Teeth | 16 |
| da (mm) | 43,7 |
| d (mm) | 40,0 |
| ND (mm) | 30 |
| NL (mm) | 10,0 |
| L1 (mm) | 21 |
| L (mm) | 23,8 |
| S (mm) | 16,8 |
| b (mm) | 11 |
| BH7 (mm) | 10 |
| E (mm) | 35 |
| Admissible MD (Nm) | 1,1 |
| Weight (kg) | 0,120 |
| Corresponding Counter Wheel (Article-No.) | 36199107 |
