Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Transmission (i) | 2:1 (15/30) |
---|---|
Module | 2,5 |
No. of Teeth | 15 |
da (mm) | 42,2 |
d (mm) | 37,5 |
ND (mm) | 30 |
NL (mm) | 15,4 |
L1 (mm) | 31 |
L (mm) | 33,3 |
S (mm) | 18,6 |
b (mm) | 17 |
BH7 (mm) | 10 |
E (mm) | 55 |
Admissible MD (Nm) | 1,6 |
Weight (kg) | 0,160 |
Corresponding Counter Wheel (Article-No.) | 36199157 |