Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded. • Low cost angular gear drive, ratio 1:1, 6 sizes. • Suitable for lower torques and intermittend use. • Shafts running directly in the self-lubricating housing material. • Easy to mount and maintenance-free. Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C.
| dh9 (mm) | 8 |
|---|---|
| D (mm) | 18 |
| E1 (mm) | 45 |
| E2 (mm) | 28,4 |
| HGes (mm) | 28,2 |
| HM (mm) | 15 |
| LE (mm) | 70 |
| LW (mm) | 20 |
| r (mm) | 9 |
| s (mm) | 5,8 |
| T (mm) | 4 |
| Module | 1,5 |
| No. of Teeth | 16/16 |
| MDzul. (Ncm) | 30 |
| Weight (g) | 180 |
