General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning.
Gearbox Size | 2 |
---|---|
Transmission | 70 |
Input Shaft d1 (mm) | 25 |
Output Shaft d2 (mm) | 25 |
Rim Length b (mm) | 120 |
Max. Md1 at 50 rpm (Nm) | 130 |
Max. Md1 at 250 rpm (Nm) | 123 |
Max. Md1 at 500 rpm (Nm) | 115 |
Max. Md1 at 750 rpm (Nm) | 103 |
Max. Md1 at 1000 rpm (Nm) | 92 |
Max. Md1 at 1500 rpm (Nm) | 82 |
Max. Md1 at 3000 rpm (Nm) | 66 |
Max. P1 at 50 rpm (kW) | 0,72 |
Max. P1 at 250 rpm (kW) | 3,39 |
Max. P1 at 500 rpm (kW) | 6,34 |
Max. P1 at 750 rpm (kW) | 8,51 |
Max. P1 at 1000 rpm (kW) | 10,14 |
Max. P1 at 1500 rpm (kW) | 13,56 |
Max. P1 at 3000 rpm (kW) | 21,82 |
Weight (kg) | 12 |