Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic. Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request.
| Nenn- spannung (V) | 24 |
|---|---|
| Leerlauf- drehzahl n0 (min -1) | 290 |
| Nenn-- drehzahl nN (min -1) | 243 |
| Nenn- drehmoment MN (Nm) | 0,29 |
| max. Drehmoment Mmax. (Nm) | 1,15 |
| max. Strom Imax. (A) | 1,4 |
| Getriebe- stufen | 2 |
| Übersetzung (i) | 28.1 |
| Maß L (mm) | 32 |
| Gewicht (g) | 90 |
