Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x G + C. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges.
Size | 180-1 |
---|---|
Disc springs (quantity) | 1 |
Torque (Nm) | 2 - 10 |
Speed (min-1) | 8500 |
Pilot Bore d (mm) | 5,7 |
Bore d max. (mm) | 20 |
Outer-Ø D (mm) | 45 |
B (mm) | 8,5 |
Bore of Sprocket (mmH8) | 34,00 |
b max. (mm) | 7 |
Standard Bush Length (mm) | 4,2 |
Alternative Bush Length (mm) | - |
Alternative Bush Length (mm) | - |
F (mm) | 2 |
s (mm) | 2,5 |
L (mm) | 33 |
SW (mm) | SW 41 |
DM (mm) | - |
M (mm) | M30 |
G (mm) | M4 |