Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge. * See catalogue page.
For Sliding Hub | 1 |
---|---|
Torque min. (Nm) | 14 |
Torque max. (Nm) | 70 |
Speed max. (rpm) | 5600 |
Clamping Tool A (mm) | 50 |
Clamping Tool a -0,2 (mm) | 5 |
B (mm) | 17 |
b min. (mm) | 3 |
b max. (mm) | 10 |
Outer-Ø D (mm) | 68 |
DN (mm) | 45 |
Sprocket Bore d1 H8 (mm) | 44 |
Pilot Bore (mm) | 10 |
d Pilot Bore (mm) | 25 |
Adjustment Screw G (mm) | M* |
L (mm) | 52 |
SW (mm) | 41 |
Covering St. S S (mm) | 3,0 |
Weight (g) | 900 |