Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge. * See catalogue page.
| For Sliding Hub | 2 |
|---|---|
| Torque min. (Nm) | 26 |
| Torque max. (Nm) | 130 |
| Speed max. (rpm) | 4300 |
| Clamping Tool A (mm) | 67 |
| Clamping Tool a -0,2 (mm) | 6 |
| B (mm) | 19 |
| b min. (mm) | 4 |
| b max. (mm) | 12 |
| Outer-Ø D (mm) | 88 |
| DN (mm) | 58 |
| Sprocket Bore d1 H8 (mm) | 58 |
| Pilot Bore (mm) | 14 |
| d Pilot Bore (mm) | 35 |
| Adjustment Screw G (mm) | M* |
| L (mm) | 57 |
| SW (mm) | 50 |
| Covering St. S S (mm) | 3,0 |
| Weight (g) | 1600 |
