Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge. * See catalogue page.
For Sliding Hub | 3 |
---|---|
Torque min. (Nm) | 50 |
Torque max. (Nm) | 250 |
Speed max. (rpm) | 3300 |
Clamping Tool A (mm) | 84 |
Clamping Tool a -0,2 (mm) | 6 |
B (mm) | 21 |
b min. (mm) | 5 |
b max. (mm) | 15 |
Outer-Ø D (mm) | 115 |
DN (mm) | 75 |
Sprocket Bore d1 H8 (mm) | 72 |
Pilot Bore (mm) | 18 |
d Pilot Bore (mm) | 45 |
Adjustment Screw G (mm) | M* |
L (mm) | 68 |
SW (mm) | 65 |
Covering St. S S (mm) | 4,0 |
Weight (g) | 3100 |