Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA.
| d (mm) | 14 |
|---|---|
| D (mm) | 20 |
| L (mm) | 28 |
| L1 (mm) | 23 |
| A (mm) | 21 |
| Torque M max. (Nm) | 24 |
| Thread | M17x1 |
| SW (mm) | 20 |
| Torque (Nm) | 25 |
| Weight (g) | 35,3 |
