Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly.
| d (mm) | 10 |
|---|---|
| D (mm) | 16 |
| D1 (mm) | 28 |
| L (mm) | 24 |
| L1 (mm) | 14 |
| L2 (mm) | 28,0 |
| Transmissible Torque T (Nm) | 34 |
| Transmissible Axial Force Fax (kN) | 6,5 |
| PW (N/mm²) | 90 |
| PN (N/mm²) | 70 |
| Bolts DIN 912 No. of (pcs) | 2 |
| Size | M4 x 8 |
| M No. (Nm) | 4 |
| Weight (kg) | 0,05 |
