Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub
d (mm) | 35 |
---|---|
D (mm) | 47 |
L (mm) | 52 |
A (mm) | 45 |
L1 (mm) | 32 |
L2 (mm) | 58 |
D1 (mm) | 69 |
Transmissible Torque T (Nm) | 800 |
Transmissible Axial Force Fax (kN) | 44 |
Pw (N/mm²) | 106 |
Surface Pressure Hub P (N/mm²) | 81 |
Bolt Size M (DIN 912, 12.9) | 8 x M6 |
Tightening Torque TA (Nm) | 17 |
Weight (kg) | 0,55 |