Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub
| d (mm) | 48 |
|---|---|
| D (mm) | 62 |
| L (mm) | 70 |
| A (mm) | 62 |
| L1 (mm) | 45 |
| L2 (mm) | 78 |
| D1 (mm) | 87 |
| Transmissible Torque T (Nm) | 1950 |
| Transmissible Axial Force Fax (kN) | 81 |
| Pw (N/mm²) | 102 |
| Surface Pressure Hub P (N/mm²) | 78 |
| Bolt Size M (DIN 912, 12.9) | 8 x M8 |
| Tightening Torque TA (Nm) | 41 |
| Weight (kg) | 1,13 |
