Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub
| d (mm) | 6 |
|---|---|
| D (mm) | 14 |
| L (mm) | 21 |
| A (mm) | 18,5 |
| L1 (mm) | 10 |
| L2 (mm) | 24 |
| D1 (mm) | 25 |
| Transmissible Torque T (Nm) | 12 |
| Transmissible Axial Force Fax (kN) | 4 |
| Pw (N/mm²) | 185 |
| Surface Pressure Hub P (N/mm²) | 80 |
| Bolt Size M (DIN 912, 12.9) | 3 x M3 x 10 |
| Tightening Torque TA (Nm) | 2 |
| Weight (kg) | 0,05 |
