Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub
d (mm) | 28 |
---|---|
D (mm) | 39 |
L (mm) | 45 |
A (mm) | 38 |
L1 (mm) | 25 |
L2 (mm) | 51 |
D1 (mm) | 61 |
Transmissible Torque T (Nm) | 450 |
Transmissible Axial Force Fax (kN) | 32 |
Pw (N/mm²) | 130 |
Surface Pressure Hub P (N/mm²) | 93 |
Bolt Size M (DIN 912, 12.9) | 6 x M6 x 18 |
Tightening Torque TA (Nm) | 17 |
Weight (kg) | 0,42 |