Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly.
d (mm) | 6 |
---|---|
D (mm) | 14 |
D1 (mm) | 25 |
L (mm) | 19 |
L1 (mm) | 10 |
L2 (mm) | 22,0 |
Transmissible Torque T (Nm) | 5 |
Transmissible Axial Force Fax (kN) | 1,7 |
PW (N/mm²) | 90 |
PN (N/mm²) | 70 |
Bolts DIN 912 No. of (pcs) | 3 |
Size | M3 x 8 |
M No. (Nm) | 1,2 |
Weight (kg) | 0,03 |