Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released.
d (mm) | 14 |
---|---|
D (mm) | 23 |
L (mm) | 26 |
A (mm) | 23 |
L1 (mm) | 14 |
L2 (mm) | 30 |
D1 (mm) | 38 |
Transferable Torque T (Nm) | 30 |
Axial Force Fax (kN) | 4 |
Surface Pressure Shaft PW (N/mm²) | 59 |
Surface Pressure Hub PN (N/mm²) | 36 |
Clamping Bolts DIN 912 (N. x Typ) | 4 x M4 |
Torque TA (Nm) | 2 |
Weight (kg) | 0,15 |