Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released.
| d (mm) | 32 |
|---|---|
| D (mm) | 43 |
| L (mm) | 45 |
| A (mm) | 38 |
| L1 (mm) | 25 |
| L2 (mm) | 51 |
| D1 (mm) | 65 |
| Transferable Torque T (Nm) | 310 |
| Axial Force Fax (kN) | 19 |
| Surface Pressure Shaft PW (N/mm²) | 64 |
| Surface Pressure Hub PN (N/mm²) | 48 |
| Clamping Bolts DIN 912 (N. x Typ) | 8 x M6 |
| Torque TA (Nm) | 8 |
| Weight (kg) | 0,48 |
