Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released.
d (mm) | 35 |
---|---|
D (mm) | 47 |
L (mm) | 52 |
A (mm) | 45 |
L1 (mm) | 32 |
L2 (mm) | 58 |
D1 (mm) | 69 |
Transferable Torque T (Nm) | 340 |
Axial Force Fax (kN) | 19 |
Surface Pressure Shaft PW (N/mm²) | 46 |
Surface Pressure Hub PN (N/mm²) | 34 |
Clamping Bolts DIN 912 (N. x Typ) | 8 x M6 |
Torque TA (Nm) | 8 |
Weight (kg) | 0,55 |