Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides.
d1H7 (mm) | 10 |
---|---|
d2 (mm) | 20 |
l1 (mm) | 10 |
l2 (mm) | 45 |
bJS9 (mm) | 3 |
t (mm) | 11,4 |
admiss. Torque* at 100 min¹ (Nm) | 32,5 |
200 rpm | 22,1 |
300 rpm | 19,5 |
400 rpm | 15,6 |
500 rpm | 14,3 |
700 rpm | 13 |
800 rpm | 9,1 |
Weight (kg) | 0,08 |