Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides.
d1H7 (mm) | 12 |
---|---|
d2 (mm) | 25 |
l1 (mm) | 11 |
l2 (mm) | 50 |
bJS9 (mm) | 4 |
t (mm) | 13,8 |
admiss. Torque* at 100 min¹ (Nm) | 58,5 |
200 rpm | 32,5 |
300 rpm | 27,3 |
400 rpm | 20,8 |
500 rpm | 18,2 |
700 rpm | 14,3 |
800 rpm | 11,7 |
Weight (kg) | 0,14 |